| |
 |
|
|
|
|
|
 |
MODEL SS404
Fiber Cement Shear
Cuts fiber cement siding up to 5/16" thick. Smooth, fast, and dust-free operation. Based on a 1/2" 6.5-amp motor. Reversible blades machined from solid tool steel. Average blade cost is $3 per house.
|
|
 |
|
MODEL SS414
Fiber Cement Curve Shear
Cuts scroll-like curves in fiber cement siding up to 5/16" thick. Not for straight cuts. Smooth, fast, and dust-free operation. Based on a 1/2" 6.5-amp motor. Reversible blades machined from solid tool steel.
|
|
 |
|
MODEL SS424
Backerboard Shear
Cuts HardiBacker backerboard up to 1/2" thick. Not for siding. For straight and curved cuts. Smooth, fast, and dust-free operation. Based on a 1/2" 6.5-amp motor. Reversible blades machined from solid tool steel.
|
|
 |
|
MODEL SS402
Fiber Cement Shear
Sioux pneumatic
Air volume requirement: 10cfm. Cuts fiber cement siding up to 5/16" thick. Smooth, fast, and dust-free operation. Reversible blades machined from solid tool steel. Average blade cost is $3 per house.
|
|
 |
|
MODEL SS412
Fiber-Cement Curve Shear
Sioux pneumatic
Air volume requirement: 10cfm. Cuts scroll-like curves in fiber cement siding up to 5/16" thick. Not for straight cuts. Smooth, fast, and dust-free operation. Reversible blades machined from solid tool steel.
|
|
 |
|
MODEL SS422
Backerboard Shear
Sioux pneumatic
Air volume requirement: 10cfm. Cuts HardiBacker backerboard up to 1/2" thick. Not for siding. For straight and curved cuts. Smooth, fast, and dust-free operation. Reversible blades machined from solid tool steel.
|
|
 |
|
MODEL SS210
Manual Shear
Cuts 5/16" fiber cement plank/panel, 1/4" interior backer board, fiber cement roof shakes, 21" gable angle cut. No power source needed.
|
|
 |
|
MODEL SS110
Portable Production Shear
Newly redesigned state-of-the-art pneumatic platform shear. Cuts fiber cement siding up to 10-5/8" wide with dust-free operation. One person set-up takes less than one minute. Moves easily around worksite using collapsable legs and built-in transport wheels.
|
|
 |
| |
|
|
|
|
Every Snapper Shear's single-piece head is machined from aircraft-grade aluminum by computer-controlled milling equipment to a tolerance of 0.001", for unparalleled reliability and cutting accuracy.
|
The PacTool Siding Gauge is a combination siding clamp and gauge. With a set of two, one person can quickly and accurately install siding without the need for time-consuming layout.
|
If your SnapperShear does not operate properly, due to defective workmanship or material, simply ship it to PacTool and we will repair and return it. It's as easy as that.
|
|
|
